Shenzhen Feiyang Protech Corp., Ltd.
Shenzhen Feiyang Protech Corp., Ltd. Polyaspartic Polyurea Materials Researcher and Manufacturer
Add to Cart
PROFILE
YD-5406-1 is a cashew phenol amine epoxy curing agent with very good adhesion and greatly reduced strength building time. It can also have a good curing effect at a low temperature of 5 degrees Celsius, which is faster than traditional polyamide.
ADVANTAGES
Excellent adhesion.
Faster curing speed than polyamide.
APPLICATIONS
Bonding
Anti-corrosion
STORAGE
It should be sealed in its original packaging and stored in a dry place at a temperature range of 0-40°C (the temperature must not fall below 0°C). It should not be placed in direct sunlight.
INDEX
| Appearance | Brown red viscous liquid |
| Viscosity (25℃) | 2000-10000 |
| Amine value | 210±30 |
| Relative density (25℃) | 0.98 |
| Active Hydrogen Equivalent Weight (AHEW) | 190 |
| Resin Addition Amount (per 100g)/g | 100 |
BASIC FEATURES
| Working Time (25°C, 100g): | 1.5-3h |
| Shore D Hardness 48h | ≥75D |
| Tinplate sheet adhesion ① | Level 0-1 |
The above data pertains to the formulation when used with a bisphenol A type epoxy resin with an equivalent weight of 180-190.
Note: ① The above data: 128 resin: curing agent: xylene mixed solvent (xylene 30% + anhydrous ethanol 30% + C3H6O 40%) = 100:100:100, 100μm wet film was prepared and cured at 80℃×1h, and the adhesion based hundred grid test.